TYPICAL PHYSICAL PROPERTIES

Property Test Method Value
Ultimate elongation ASTM D412 700%
Tensile strength ASTM D412 5000 psi
Melt index ASTM D1238 5.0g/10 min. @ 177º C

Average peel
[10~(gm/100in 2 /day)

 ASTM D3167 >150 pli

LAMINATION INFORMATION
Argotec BOC-9450 requires a minimum lamination temperature of 195°F (90°C).

STORAGE AND HANDLING
Argotec BOC-9450 requires no special storage or handling. Simply keeping it clean and dry will ensure usable product.

INSTALLATION INSTRUCTIONS
It is advisable to wipe the laminate with isopropyl alcohol prior to applying Argotec BOC-9450 to the composite edge in order to remove any contaminants that could interfere with the bond.

This product is designed for use in conjunction with vacuum forming. First, secure it to the edge of the glass laminate/composite by tape. The composite is then inserted into the vacuum bag and autoclaved.

TECHNICAL DATA
ARGOTEC BOC-9450 EDGE SEAL

Argotec BOC-9450 Edge Seal is designed for use by glass laminators to seal the edges of multi-layer composites made from glass or other glass-like materials. It offers the following benefits:

  • Provides a degree of protection to the edge of the glass laminate from chipping or other mild physical damage.
  • Prevents moisture penetration between the composite layers.
  • Protects against damage due to migration of solvents contained in the caulks used to install the finished glass laminate.
  • Creates an aesthetically pleasing appearance on the laminate edge.

Argotec BOC-9450 Edge Seal is currently available in a variety of standard widths. Custom-slit widths are also available upon request. Master rolls may be purchased in dimensions of 40-inches (1 m) wide by 120-feet (36.5 m) long.

 

 


Copyright 2006©Argotec Inc. All rights reserved.
P.O. Box 1167 Greenfield, MA 01302 Tel: (413)772-2564 Fax: (413)772-2565 E-mail: info@argotecinc.com